Brodit houder Pidion BP50

Brodit houder Pidion BP50

Brodit

511554

Availability: Out of stock

Incl. Tax: €34.94 €28.88 Excl. Tax:
When keeping your device in a passive holder, it is always within easy reach.

A portable handsfree or a charging cable can be connected to the device when it is in the holder.

The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection.

Attach onto a ProClip Mounting Platform.


Accessoiremerk Brodit
Type PDA houders
Connection Passive
Pedestal lengte No
Pedestal hoek ° t.b.v. houder No
Pedestal eigenschap No
Houder professional No
Toestel connector N/A
Toestel houder dikte N/A
Type No
Toestel houder breedte N/A
Pedestal kleur No
Toestel houder op- en/of afsluitbaar No
Productinfo Brodit houder
Veiligheid (productinfo) Brodit houder
Productinstallatie Brodit houder
Product geschikt voor info Brodit houder
  • Pidion BP50
Please read all of the instructions and look at the pictures before attaching the holder. 1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.
2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.
3. To place the device in the holder: Place the lower part of the device in the holder, then flip/press the upper part forwards so it snaps into place in the holder. To remove the device from the holder: Press upwards on the upper part of the holder, in the same time pull the upper part of the device out from the holder and then lift the device up and out from the holder.
4. The holder is in place.