Brodit Active holder Dell Venue 8 Pro (5855) USB sig.plug

article number
521856
Not in stock
€85.95
-
+
Details
Use an active holder for your Dell Venue 8 Pro while driving and you will always have a freshly charged battery! Neat, discreet and convenient. Custom made with a perfect, firm fit. With USB-cable with cig-plug adapter, choose to connect either to the vehicle's USB outlet or the 12V socket. You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the device into place in the holder so it connects to the charging, and to take it out of the holder when leaving the car.
 
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Mounting plate 42x50 mm. Made of high grade black ABS/Acetal plastic. Made in Sweden.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable, this feature must be supported by the stereo in your car. You can easily test if this works by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
 
Dimensions: 150 x 173 x 45 mm (W x H x D mm)
Weight: 257 g
Cable length (+connector with plug 85 mm): 145 cm
 
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices like mobile phones and GPS devices. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
 
This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).
More Information
More Information
Accessory brand Brodit
Barcode 7320285218567
Recommended retail price incl. VAT 90.95
Device holder type Tablet
Connection USB (Cig.plug)
Device holder features Device specific
Device with or without cover zonder hoes
Voltage 12/24V geschikt
Device holder lockable? no
Color Black
Productinfo Brodit houder
Product installation Mount the holder on a ProClip in your vehicle. A detailed installation manual is included in the product packaging
Product suitable for Brodit houder
Reviews
Write Your Own Review
You're reviewing:Brodit Active holder Dell Venue 8 Pro (5855) USB sig.plug
Compatibility
Related products
Instruction
Please read all of the instructions and  look at the pictures before attaching the holder.
 
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.
 
2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.
 
3. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.
 
4. The holder is in place in.

Scroll to top